Lab Cushion
Product Code : EL-LI-10761
Quick Answer: Lab Cushion is an interlocking, multi-purpose sink-liner that cushions glassware against breakage and traps objects that would otherwise lodge in waste pipes, supplied as a pack of 4 mats of 210 x 210 x 10 mm.
Last updated: October 2026
Key Features
- Interlocking pieces combine to cover the sink base and are cut to size
- Cushioning helps prevent glass breakages
- Traps objects that would otherwise lodge in waste pipes or traps
- Also used as a draining rack, bench protection matting or heat-proof gripper
- Each mat 210 x 210 x 10 mm; pack of 4
- Blended vulcanised polymer, 60 ± 5 Shore A
Technical Specifications
| Specification | Value |
|---|---|
| Material | Blended vulcanised polymer |
| Mat size (L x W x D) | 210 x 210 x 10 mm |
| Pack | 4 mats |
| Indentation hardness | 60 ± 5 Shore A |
| Tear strength | 17 kN/m |
| Linear shrinkage rate | 3.2–3.6 % |
| Tensile strength | 7.5 MPa |
| Elongation at break | 300% |
| Specific gravity | 1.16 ± 0.05 g/cm3 |
| Rebound resilience | 60% |
About This Product
Enough pieces are joined to cover the base of the sink and then trimmed, after which the matting cushions dropped glassware and stops small items reaching the waste trap. Away from the sink, this Laboratory Instruments matting also works as a draining rack, bench protection or a heat-proof gripper.
Frequently Asked Questions
Q1. How is the Lab Cushion fitted to a sink?
Combine the required number of interlocking pieces to cover the base of the sink, then cut to size.
Q2. What else can the Lab Cushion be used for?
Besides lining sinks, it can serve as a draining rack, bench protection matting or a heat-proof gripper.
Questions about the Lab Cushion? Write to Lab Equipments Ambala.
