Oxygen Flow Meter 0 – 15 LPM
Product Code : EL-RAAE-10962
Quick Answer: Oxygen Flow Meter 0 – 15 LPM is a Thorpe tube flow meter that regulates and measures the flow rate of medical oxygen supplied to a patient, reading 0 - 15 L/min with 10% accuracy and mounting through a DISS inlet connector.
Last updated: October 2026
Key Features
- Thorpe tube design with DISS input connector for panel/regulator mounting
- Oxygen model: 0 - 15 L/min, accuracy 10%
- Graduation visible over 270 degrees; tube gradation max 0.5 L/min at low flow, max 1 L/min at high flow
- Needle valve and body of brass or aluminium; transparent, shatter-resistant polymer column
- Pressure compensated; calibrated at 50-55 psi / 345-380 kPa / 3.4-3.8 bar inlet gauge pressure
- Built-in inlet filter; rough-surfaced adjustment knobs; cleanable with a damp cloth and disinfection solution
Technical Specifications
| Specification | Value |
|---|---|
| Type | Thorpe tube flow meter, pressure compensated |
| Gas | Medical oxygen |
| Range | 0 - 15 L/min |
| Accuracy | 10% |
| Tube gradation | Max 0.5 L/min at low flow, max 1 L/min at high flow |
| Maximum flow when fully opened | 50 L/min |
| Graduation visibility | Over 270 degrees |
| Calibration | 50-55 psi / 345-380 kPa / 3.4-3.8 bar inlet gauge pressure |
| Nominal inlet pressure | > 50 psi (345 kPa / 3.45 bar) |
| Peak inlet pressure | At least 100 psi (690 kPa / 6.89 bar) |
| Inlet connector | DISS, for panel/regulator mounting |
| Needle valve and body | Brass or aluminium |
| Column | Transparent, graduated (metric system), shatter resistant polymer |
| Filter | Built-in inlet filter |
About This Product
Medical oxygen supplied to a patient passes through this flow meter, which regulates and measures the flow rate across 0 - 15 L/min. Its pressure compensated design gives the specified accuracy over the whole range of input pressures, and the graduation stays visible over more than 270 degrees. In Resuscitation and Anaesthesiology Equipment, it mounts on a panel or regulator through a DISS input connector and can be cleaned with a damp cloth and a disinfection solution.
Frequently Asked Questions
Q1. What flow range does the oxygen flow meter cover?
0 - 15 L/min with 10% accuracy; tube gradation is at most 0.5 L/min at low flow and 1 L/min at high flow. Fully opened, it gives a maximum of 50 L/min.
Q2. How does it connect?
Through a DISS input connector, for mounting on a panel or regulator.
Q3. What inlet pressure is it calibrated for?
50-55 psi / 345-380 kPa / 3.4-3.8 bar inlet gauge pressure; nominal inlet pressure is above 50 psi and peak inlet pressure at least 100 psi.
Lab Equipments Ambala packs and ships export orders for buyers in Ecuador, Bolivia and Togo.
For a quotation on the Oxygen Flow Meter 0 – 15 LPM, contact Lab Equipments Ambala.
