Telegraph Tapping Key
Product Code : SCL-EAE-11259
Quick Answer: Telegraph Tapping Key is a hand-operated make-and-break switch for low-voltage circuits, used to send short and long electrical pulses, the dots and dashes of Morse code, to a connected buzzer, sounder or lamp.
Last updated: October 2026
Key Features
- Lever-operated key that closes the circuit when the knob is pressed and opens it when released
- Momentary contact action, so the circuit stays closed only while the key is held down
- A brief press gives a dot; holding the key down longer gives a dash
- Works with a separate buzzer, telegraph sounder or indicator lamp to give the signal
- For current-limited, low-voltage supplies only; never for mains
Technical Specifications
| Specification | Value |
|---|---|
| Product type | Manual make-and-break electrical key |
| Primary application | Morse-code and telegraph-circuit demonstrations |
| Switching action | Momentary contact |
About This Product
Wired in series with a low-voltage supply and a receiving device, the key lets students tap out letters from a Morse-code chart and see how mechanical contact controls current. Two keys with suitable receivers can be arranged as a simple wired link between two stations, a practical way for Electrical And Electronics classes to explain how the electrical telegraph worked.
Frequently Asked Questions
Q1. Does the Telegraph Tapping Key make a sound by itself?
No. It only opens and closes the circuit; a buzzer, sounder or indicator lamp connected in the circuit gives the audible or visible signal.
Q2. How are dots and dashes produced with the key?
A brief press of the lever gives a short pulse, read as a dot. Holding the key down longer gives a longer pulse, read as a dash.
Q3. What comes with the tapping key?
One Telegraph Tapping Key. The battery or power supply, buzzer, sounder, lamp, connecting leads and receiving telegraph unit are not included unless stated.
For a quotation on the Telegraph Tapping Key, contact Lab Equipments Ambala.
