Regulated Bench Power Supply 30V 1A
.jpg)
Product Code : SCL-EAE-11326
Quick Answer: Regulated Bench Power Supply 30V 1A is a bench-top laboratory DC source with regulated output up to 30 V and 1 A, for powering and testing low-voltage electronic circuits.
Last updated: October 2026
Key Features
- Output up to 30 V DC
- Current up to 1 A DC
- Regulated DC output, steadier than unregulated adapters or discharging cells
- Bench-top format for student workstations and demonstration tables
Technical Specifications
| Specification | Value |
|---|---|
| Product type | Regulated laboratory DC bench power supply |
| Output voltage | Up to 30 V DC |
| Output current | Up to 1 A DC |
| Regulation | Regulated output |
About This Product
Breadboard circuits, Ohm's law and series-parallel resistor networks, and the biasing of diodes, LEDs and transistors are typical Electrical And Electronics uses, with the output set low before the load is connected and then raised gradually. Because the regulated output does not drift as a cell would, comparative readings over a long session stay consistent.
Frequently Asked Questions
Q1. What output does the Regulated Bench Power Supply 30V 1A give?
Regulated DC up to 30 V and up to 1 A. The connected load must stay within both limits.
Q2. Can it be used to test LEDs and transistors?
Yes, with correct polarity, suitable bias conditions and current limiting; a semiconductor should never be connected without an appropriate limiting circuit.
Questions about the Regulated Bench Power Supply 30V 1A? Write to Lab Equipments Ambala.
.jpg)
.png)
 (1).png)
 (1).png)
 (1).png)
.jpg)
